This Professional Ergonomic Extra-Heavy-Duty Fabric High Back Chair has chair height, armrest height, seat and back adjustable functionality so you can be sure to find a position that's comfortable for you. It has a high weight capacity and a sturdy construction making it a durable option for your work space.
Features:
This chair is recommended for users 176cm or taller.
It's recommended for 8+ hours of usage.
The chair has a weight capacity of 160 kg.
This chair has an upholstered fabric back, chrome-plated steel base and metal armrests with a moulded contoured padded seat.
The adjustable back tilt, chair tilt, gas lift, back height and armrests will allow you to alter the chair in a way that suits you.
This chair is Blue Load rated meaning that it has a weight capacity of up to 160 kg and is suitable for use in heavy duty, industrial environments, plus it is also Green Tick rated to be environmentally friendly.
This chair is suitable for commercial use.
The Archer Executive High Back Chair is a comfortable chair which you can use for up to 5 hours at a time. This chair allows you to adjust the height and tilt so you can customise it to your needs.
Features:
This chair is recommended for users 169cm or taller.
It's recommended for 3-5 hours usage at a time.
It has a 120 kg weight capacity.
This chair has padded armrests for extra comfort.
You can adjust both the chair height and tilt for your comfort.
This chair measures 630 W x 660 D x 1,145 H mm with a minimum height of 1,050 mm.
This chair takes approximately 30 minutes to assemble.
It has a black design.
The armrests sit approximately 680 mm to 775 mm above the ground, depending on the level of the seat height.
This chair is not suitable for commercial use.
J.Burrows is the dependable choice for furniture that is of great quality and value.
This Professional Ergonomic Extra-Heavy-Duty Mesh Back Chair has chair height, armrest height, seat and back adjustable functionality so you can be sure to find a position that's comfortable for you. It has a high weight capacity and a sturdy construction making it a durable option for your work space.
Features:
It's recommended for 8+ hours of usage.
The chair has a weight capacity of 160 kg.
The chair has a weight capacity of 160 kg.
This chair has a mesh back, chrome-plated steel base and metal armrests with a moulded contoured padded seat.
The adjustable back tilt, chair tilt, gas lift, back height and armrests will allow you to alter the chair in a way that suits you.
The adjustable back tilt, chair tilt, gas lift, back height and armrests will allow you to alter the chair in a way that suits you.
This chair takes approximately 30 minutes to assemble.
This chair is suitable for commercial use.
Stilford is the dependable choice for essential office supplies that are of great quality and value, and is designed for use in the medium business, by the sole trader and the work-from-home freelancer.
The Humanscale Liberty Chair, with Form-Sensing Mesh Technology, is unlike any mesh chair you’ve seen or experienced. With its tri-panel construction, it has the body-fitting contours that single-panel stretch mesh chairs simply can’t achieve. And it offers perfect lumbar support for everyone, without external devices or manual adjustments. Liberty’s mesh back is formed by combining three panels of non-stretch mesh in the same way a tailor combines multiple pieces of material to form a shirt. Its contours are custom-made to both fit and support the human body in unprecedented comfort.
Features:
Liberty’s intelligent mechanism-free recline uses the laws of physics and the sitter’s weight to automatically provide the perfect amount of support through the full range of recline. Without manual controls to adjust, the user can change postures effortlessly throughout the day.
Liberty’s mesh back is formed by combining three panels of non-stretch mesh material in the same way a tailor combines multiple pieces of fabric to create a shirt. Its contours are made to custom fit and support each individual sitter throughout the day.
Liberty was engineered to automatically adjust to whoever sits in it, instantly accommodating each user regardless of size and weight. Because it has no manual adjustments and features Humanscale’s weight-sensitive recline, the user can move easily and without restrictions.
Specifications:
Seat Depth: 41 - 48 cm
Seat Height: 41-53 cm
Seat Width: 53 cm
Backrest Height: 57 cm
Backrest Width: 51 cm
Chair Width: 67 cm
Weight: 12.3 kg
Weight capacity 136kg
This Matrix mesh drafting chair features chair tilt and gas lift functionality allowing you to adjust the chair to suit your needs. This chair has a fabric and mesh construction making it more comfortable for you to use while you work. It's lightweight and can easily be maneuvered around thanks to the 5 castor wheels.
Features:
This chair is recommended for users 148cm or taller.
It's suitable for over 8 hours of usage at a time.
It has a weight capacity of 130 kg.
The chair has a flexible fabric, mesh and nylon construction making it comfortable to use.
It has back tilt and gas lift height functionality so you can adjust it to suit your needs.
This chair has a contemporary, black design to suit pre-existing decor.
This chair is suitable for commercial use.
The Matrix High Back Fully Ergonomic Chair has a heavy-duty, robust design and is AFRDI certified making it ideal for commercial use. It features an independent seat tilt and rack rake adjustment mechanism so you can alter the chair to suit your needs and keep you comfortable.
Features:
It's suitable for 8+ hours use at a time.
It has a weight capacity of 130 kg.
It has a reccomended minium user height of 167 cm.
The seat has a comfortable fabric material.
It's height adjustable and features back tilt, chair tilt and seat tilt functions so you can adjust it to suit your needs.
This chair has a durable nylon base.
This chair has both the AFRDI Blue Tick Product Certification, and AFRDI Green Tick Product Certification.
It takes approximately 5 minutes for assembly.
This chair is suitable for commercial use.
This J.Burrows Halifax Ergonomic Chair is a great upgrade for your office chair and home workspace. It comes with height-adjustable armrests and features a weight-balanced synchro tilt mechanism which adjusts seat and back tilt together for optimum comfort.
Features:
It is suitable for 5 - 8 hours use per day.
It has a weight capacity of 135 kg.
The mesh backrest helps keep you cooler while working.
This chair has a 6 cm thick cut foam seat for comfort.
It has a weight-balanced synchro tilt mechanism which adjusts seat and back tilt together to simplify finding your optimum comfort.
The armrests are height adjustable.
The chair is AFRDI Blue Tick Rated Load certified meaning it has been tested to AS/NZS 4438 standards and is suitable for heavy commercial use conditions.
It takes approximately 30 minutes to assemble.
This chair uses FSC certified wood meaning it uses timber harvested from responsibly managed forests in a sustainable and environmentally conscious manner.
This chair is suitable for commercial use.
J.Burrows is the dependable choice for furniture that is of great quality and value.
Dimensions (cm): 73L x 73D x 96H
Approximate weight (kg): 20
No gas lift or recline lock
Backrest may show signs of fray on corners
Product location: Glendenning NSW
Contact Us for
Delivery quote
Bulk buy enquiries
The Matrix Antimicrobial Visitor Chair can be used as an extra seating option in the meeting room, reception and ideal for medical centres. It is light enough to position where you need it, has a stackable design and has a sturdy steel construction. It has an antimicrobial composition to protect you against germs.
Features:
It is suitable for 5 to 8 hours use per day
It has a weight capacity of 160kg
This chair can be stacked 3 units high
It comes pre-assembled so you don't have to put it together
The backrest and seat are covered in an antimicrobial material that limits the spread of germs
It has a business grade construction with steel base, polypropylene backrest frame and nylon armrests
This chair is AFRDI Blue Tick Rated Load certified meaning it has been tested to AS/NZS 4688:2000 (R2016) standards and is suitable for heavy commercial use conditions
J.Burrows is the dependable choice for furniture that is of great quality and value.
This Flash II Ergonomic Chair is perfect for all day use in your workspace. It has a fully ergonomic design with an extra wide, moulded foam seat and an inbuilt lumbar support to be both comfortable and supportive.
It's suitable for 8+ hours use at a time.
It has a weight capacity of 130 kg.
The chair comes with a 3 lever ratchet back mechanism so you can adjust it to suit your needs.
This chair is Blue Tick rated meaning it’s been tested to AS/NZS 4438 standards as sound, strong, durable, ergonomic and ideal for all day use in commercial environments, plus it is also Green Tick rated to be environmentally friendly.
The seat measures 510 W x 500 D x 580 H mm.
It has an estimated assembly time of 5 minutes.
This chair is suitable for commercial use.
The chair with the distinct side apertures. Light, transparent, slender. The frame with stretch fabric gives the chairs the appearance of the flexible elasticity of a tent construction or a kite.
The elegant form is in fact the result of years of intensive functional studies: for Modus, Klaus Franck and Werner Sauer perfected the principle of automatic synchro-adjustment with torsion rods even further. Modus also meets ecological requirements: all components are constructed from environmentally friendly materials, can be dismantled individually and are therefore highly repair-friendly.
Form or function? Modus does justice to both design approaches.
Swivel chairs with automatic synchro-adjustment: four torsion rods form the central swivel axis which is held by two flat swing plates. The more the backrest is pushed backwards, the more the rods twist and tighten the tension.
The fact that the backrest and the seat are two separate sections allows scope for a wide selection of upholstery materials and backrest variations. Cantilever chairs and visitor's chairs are available to match all series of swivel chair models (with and without armrests).
Features:
Frame
5-star base and swivel plates in die-cast aluminum, coated, polished or chromium-plated.
Base finish with castors.
Black protective caps.
Double wheel swivel castors with load-dependent braking.
In black polyamide or polyurethane (for hard floors).
Seat
Seat shell in black polypropylene.
Seat upholstery: one-piece moulded foam with cover.
Exchangeable cover, in leather or fabric.
Seat functions adjustable seat angle
Back
Frame in glass fibre-reinforced polyamide with exchangeable frame covering
Dimensions:
Width 680 mm
Depth 630 mm
No gas lift or recline lock
Backrest may show signs of fray
Contact Us for
Delivery quote
Bulk buy enquiries
The Buro Alto Ergonomic Chair is an excellent option for productive working and comfort. This ergonomically designed task chair offers a refined and contemporary look, while featuring Buro's Dynamic Intelligence TM mechanism to optimise the user's comfort with intuitive movement. There is a moulded foam seat, seat slide, adjustable lumbar support and adjustable armrests, all backed by high-quality, commercial-grade construction. This chair is also endorsed by the Australian Physiotherapy Association.
Features:
It's suitable for over 8 hours of use.
It has a weight capacity of 135 kg.
This chair has a recommended user height of 176 cm.
This chair has a breathable mesh back with soft touch PU-padded arms and transparent adjustable lumbar support.
This chair has a polyurethane moulded foam seat.
The Dynamic Intelligence mechanism provides automatic body weight adjustment, alongside lumbar support to promote good posture.
The height-adjustable arms and depth-adjustable seat slide allow you to have the chair suit you.
This chair has the AFRDI Blue Tick Product Certification, and AFRDI Blue Tick Load Rated Product Certification.
This chair is suitable for commercial use.
This chair is endorsed by the Australian Physiotherapy Association.
The Alto has also been static load tested to 410kg which is a strength test simulating higher than normal dynamic loads that may be occasionally applied to the chair.
Designed For Comfort
The office chair that retains everything that's valued in a chair, while making it attainable for everyone.
Adjustable Armrest
Armrests are designed to remain parallel to your work surface as you move, so you can stay comfortably on task at every angle of recline. Fully adjustable armrests raise up and down, pivot in and out, shift forward and back and side to side, to provide steady support for your arms so your shoulders can remain in a relaxed position.
All Day Comfort
Breathable, soft to the touch and designed for all day comfort. Our 3D MicroKnit Mesh Back fabric options is designed to keep you seated comfortably, allowing air to pass through the seat fabric. The flexible seat edge offers a bit of bend, right where you need it – relieving pressure points under your thighs.
LiveBack Technology
Steelcase Series 1 was thoughtfully designed with integrated LiveBack technology, adaptive bolstering and 4D adjustable arms, delivering the dynamic performance you've come to expect from Steelcase.
A Back That Flexes with You
Steelcase Series 1 features a LiveBack(TM) flexor system that conforms to your body and moves with you to support the spine as you change postures. The optional adjustable lumbar support lets you dial in comfort even further.
4D Adjustable Arms
Fully adjustable armrests raise up and down, pivot in and out, and shift forward and back and side to side, to provide steady support for your arms so your shoulders can remain in a relaxed position.
Premium Seat Comfort for All Day Support
Our proprietary seat cushion design leverages built in air pockets that conform to your body and reduce pressure that comes from long term sitting. The flexible seat edge offers a bit of bend, right where you need it – relieving pressure points under your thighs.
Comfort Dial
Turn the comfort dial to adjust the back recline tension, covering a range of postures for healthy active sitting.
Series 1 Chair Adjustability Guide
Steelcase Series 1 was thoughtfully designed with integrated LiveBack technology, adaptive bolstering and 4D adjustable arms, delivering the dynamic performance you’ve come to expect from Steelcase.
Testified By The Best - Good Design Award Winner 2018
Steelcase Series 1 office chair delivers on what's important - performance, style and choice. It retains everything that's valued in a chair, while making it attainable for everyone. Best-in-class ergonomics, comfort and Steelcase quality, in a range of finish choices.
Specifications
Dimensions:
Height: 997mm - 1124mm
Depth: 533mm - 603mm
Width: 569mm - 880mm
Seat width: 488mm
Back height: 546mm
Others:
Wheels: Soft Casters Suitable For Hardwood Floors
The SILQ office & task chair is a breakthrough in seating design that responds to the movement of your body and offers a canvas for high design. It’s perfect for shorter sits and bringing beauty to any environment.
EVERY DAY IS ITS BEST DAYSILQ is a canvas for personal expression. The unprecedented range of material combinations allows you to move from one end of the design spectrum to the other.
It brings aesthetic cohesion, brand expression and beauty to any environment.
RESPONDING TO YOUR NATURAL MOVEMENTWhen you sit down and recline, SILQ responds to the natural movement of your body, making you feel like you’re a part of it.
And to keep things simple, it only has one manual adjustment for seat height. The rest of the outputs of the chair are based on the inputs you provide.
ARTISTRY AND INNOVATION ARE ATTRIBUTES THAT SET SILQ APART.As we have been offering new materiality options regularly since its launch, designers can continue to tailor SILQ to any brand’s unique look and bring beauty to every environment. We are introducing the new Autoreturn option for SILQ chairs with glides which ensures that the seat returns to a forward-facing position after use. This feature helps to keep a neat & tidy office while adding a sense of sophistication.
DIMENSIONS
Conference Chair (with or without Armrests)
Length: 995-1100 mm
Width: 645 mm
Depth: 590 mm
The Matrix Mesh Visitor Chair can be used as an extra seating option in the meeting room, reception or just about anywhere in your work space. It is light enough to position where you need it, has a stackable design and has a sturdy steel construction. You will be able to sit in comfort with the padded foam seat and mesh back support.
Features:
It's recommended for 8+ hours usage per day.
It has a weight capacity of 160 kg.
The backrest and seat are covered in an antimicrobial material that limits the spread of germs.
It features a stackable design, so you can easily pack it away and store it between events.
It has a business grade construction with steel base, polypropylene and mesh backrest and nylon armrests.
This chair measures 560 W x 590 D x 870 H mm.
This chair is AFRDI Blue Tick Rated Load certified meaning it has been tested to AS/NZS 4688:2000 (R2016) standards and is suitable for heavy commercial use conditions
It comes pre-assembled, so you can start using is straight away.
For indoor use only.
This chair is suitable for commercial use.
It comes in a black colourway.
J.Burrows is the dependable choice for furniture that is of great quality and value.
Steelcase Series 1 offers an exceptional entry point into high-performance seating, characterized by space efficiency and weight-activated tension adjustments – customized to fit you.
If you’re looking for comfort and support at a great value, you can’t beat this stool.
Thoughtfully designed with integrated LiveBack® flexor system that conforms to your spine to provide flexibility and support
Comes standard with an additional adjustable lumbar for extra support
A weight-activated mechanism takes the guesswork out of sitting and automatically responds to your body weight when you sit to provide the right amount of back tension as you recline. Allowing anyone, anywhere to sit down and get comfortable – quickly
Not everyone is built the same, so we’ve added comfort dial with a “boost” tension setting, offering 20% additional resistance for individuals who need it and an upright lock
Steelcase Series 1 doesn’t skimp on style choices either with plenty of back, seat and frame colors
Perfect as you work on tasks like drafting, or at counter and bar-height tables where you move frequently from sitting to standing
Ideal for collaborative group spaces and conference rooms where you can be engaged, yet comfortable for shorter periods of time
Series 1 is where serious support, lighthearted looks and exceptional value all come together—a different class that’s still best-in-class.All Steelcase High Performance task seating is contract grade quality:
Quality & durability – Steelcase Series 1 is tested above industry standards to ensure reliability now and in the future.
Details and Dimensions
Overall Height: 42.25″ – 50″
Overall Width: 23.5″ – 27″
Overall Depth: 21″ – 23.25″
Seat Depth: 18.5″
Functional Seat Depth: 15.5″ – 17.75″
Seat Width: 19.5″
Seat Height from Floor: 23″ – 30.75″
Back Width: 17.25″
Angle Between Seat and Back: 100 degrees to 122 degrees
Back height from seat: 21.5″
Arm to Floor: 29.5″ – 41.75″
Arm height From Seat: 6.5″ – 11″
Seat Height from floor: 23″ – 30.75″
Lumbar Height from Seat: 6.5″ – 8.75″
Width Between Adjustable Arms: 16″ – 20.5″
Width Between Height-Adjustable Arms: 19″
Arm Cap Pivot Range: 40 degrees
Seat Pan Angle 2: degrees
Weight Limit: 400 lbs.
Shipping Box Dimensions: 30.5” D x 29.5″ W x 13.5” H
Shipping Box Weight: 45.5 lbs.
The metal structural frame is integrated into the pattern matrix back during the moulding process, offering a level of flexible comfort that’s surprising in a chair with such an elegant, slim profile.
Dimensions:
UPHOLSTERED SEAT CHAIR
Height: 785 mm
Width: 450 mm
Depth: 520 mm
Seat Height: 450 mm
Seat Depth: 430 mm
This Pago Spider Chair Base Kit is part of the Mix and Match collection for building your own chair. It measures 640 x 640 mm and has a polished black design.
Features:
This base kit has a polished high rise alloy base design.
This kit is part of the Mix and Match collection for building your own chair, but can also be used to replace the base on most chairs.
This chair base is suitable for commercial use.
This Typhoon Viper High-Back Racing Gaming Chair is designed for gamers to sit in style and comfort. It features gas lift height adjustments as well 135 degree of back reclining and a coil spring seat so you can find the position that gives you the most support. It has a stylish, PU-faced upholstery, steel frame and five-star base that make up a stable structure and ergonomic design.
Features:
It’s suitable for 3 - 5 hours of use at a time.
It has a weight capacity of 120 kg.
This chair is recommended for users 182 cm or taller.
This chair has a PU/PVC/mesh moulded backrest and seat.
It has gas lift height adjustment and 135 degrees of back reclining along with full 360 degree swivel.
It features adjustable armrests.
It has a steel five-star base.
It takes approximately 30 minutes to assemble.
This chair is not suitable for commercial use.
The Node school chair is mobile and flexible. It’s designed for quick, easy transitions from one teaching mode to the next, unlike traditional school desks and chairs.
Move. The Node chair is highly mobile—a quality that translates directly into classroom performance. After all, a lesson plan can be carried out more effectively when seating is arranged and rearranged effortlessly. Traditional classroom seating has limited mobility, putting the burden on educators to adapt. The Node chair, however, accommodates any teaching style.The swivel seat gives students the freedom to shift focus throughout the room. And, because the personal worksurface swivels in tandem, books, laptops and other information remain at their fingertips. It’s subtle, but clear sight lines to the instructor, fellow students and whiteboards can dramatically enhance interaction.
Store. The base of the Node chair provides a unique storage solution for backpacks and student belongings that usually clutter the aisles. This allows quicker and easier transitions between teaching modes. Even the arms serve a storage purpose. Aside from being a place to rest your elbows, they are designed to hold a backpack or bag, keeping personal items safe, secure, and close at hand.
Fit. The Node chair has an adjustable worksurface, providing a perfect fit for students of all shapes and sizes. The Node chair’s worksurface accommodates both left- and right-handed students. Ergonomics of the seat bend and flex with the student
Features:
Up to 99% recyclable |
Made with up to 16% recycled content
AFRDI Level 6
ANSI/BIFMA LEVEL CERTIFIED: Level 2
Cradle to Cradle: Silver
SCS Indoor Air Advantage: Gold
Steelcase
Height Range: 680mm-1120mm
Dimensions:
Overall: 603mm W x 635mm D x 889mm H; Base: 600mm
DIA; Seat: 495mm W x 406mm D x 463mm H
This Armrest has a solid alloy and polypropylene construction making it a durable and long lasting option for your mix and match office chair. It's ergonomic in design making it suitable for use in your workplace.
Features:
These armrests are a great option for mix and match office chairs.
The armrests have solid alloy and polypropylene construction.
